With so much choice out there, it can be hard to make the right buying decision. That’s why we’ve put together this handy guide to the best monitor for solidworks for 2022 you can find today.
Solidworks is a Computer-aided design (CAD) program. Computer-aided design (CAD) is a branch of
electronic design for modeling. We use Solidworks in CAD mainly to develop the mechatronic system. In
CAD Solidworks is prime and no one can compare with it. It delivers high-level performance to users.
First, we use it for planning, modeling, visual idealization, prototyping, and management. Then use it for
designing, software building, electrical and mechanical elements.
So to run the SolidWorks program perfectly we need a powerful monitor. You may have a good pc but
without a quality monitor you not able to get perfect results. In the market various monitors are available.
But find out a perfect monitor for Solidworks is not easy. So for your help in this article, we will discuss
12 best monitor for Solidworks. It will also help you to find out the perfect monitor for you. So let’s
Our Top Picks Best Monitor For Solidworks:
We have enlisted the best monitor for solidworks for you that will give you the ultimate experience. Our team of experts has done extensive research and have come up with a list of these monitors with endless features.
|Check Best Price|
|Check Best Price|
|Check Best Price
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
|Check Best Price|
It is an all-rounder monitor with lots of features. This 23.8-inch monitor delivers full HD (1920×1080)
resolution with IPS panel technology. IPS gives solutions to the major obstruction for liquid-crystal
display. The 4 sided ultra-thin bezel design gives seamless viewing experience in a multi-monitor setup.
It also has a 178 degrees wide viewing angle. So you will enjoy fantastic viewing experience. You can use
it both in horizontal and vertical mode.
The refresh rate is 60Hz and 5ms response time. The maximum brightness is 250cd/m2. With sRGB,
EBU, SMPTE-C, Rec709 it deliver uniformity of color. It covers 100% sRGB color spectrum. It creates color
4.3 trillion color with a 14-bit look-up table. The static contrast ratio is 1000:1 and it offers esthetic color
for great picture quality. With quick and easy hardware calibration you can maintain the color accuracy
with the original life. It holds up the color accuracy of Delta E>2. It also has 6-aixs color adjustment
capacity. So the color performance is next level. Undoubtedly it is great option for editing, photography,
designing etc. moreover, it has WLED backlit for low light performance.
This monitor has adjustable stand for tilt, height, pivot and height adjustment. It is also VESA mountable.
It has 2x HDMI 1.4, 4x USB 3.0 (type A), 1x USB 3.0 (type B), 2x DisplayPort and Mini DisplayPort for
connectivity. You will get power cable, USB 3.0 cable and mini DP to DP cable inside the box. It has 3
years warranty. So overall it is a good option for Solidworks.
2. Dell Ultrasharp U2718Q – Best Dell Monitor For SolidWorks
It is another excellent quality monitor for multi-function. The design of the monitor is similar to Dell
Ultrasharp series. This 27.4-inch monitor has 4K resolution and the display has an IPS panel. Its aspect
ratio is 16:9. This monitor also has ultra-thin bezels and wide viewing angle (178 degrees). So the picture
is of premium quality and ideal for multiple monitor set-ups. You can use it on both vertical and
The response time is 5 milliseconds, the refresh rate is 60Hz and brightness is 350cd/m2. This monitor
comes with HDR10 supports and 350-nit brightness. With 99.9% sRGB and 75% Adobe RGB support, it
gives fantastic graphics and color performance. It supports 1.07 billion color schemes with 30-bits of
colors. So undoubtedly it is perfect for editing, photography and other purposes. The monitor can
connect with almost six compatible RF devices or Bluetooth 4.0 through Dell universal paring. These
devices are used for transfer radio signals across two devices. The stand is a large footprint and a cutout
to route cables. Moreover, it has great performance in darkroom conditions with WLED backlit.
You can easily adjust the height, tilt, pivot, and swivel easily. It is VESA mountable for the wall. In the port
section it has 2x USB 3.0 (down), 1x USB 3.0 (up), 2x USB 3.0 (charger), 1x HDMI 2.0, 1x DisplayPort 1.2,
1x DisplayPort 1.2 (input mini). Lastly, it is a sharp, minimal, and professional design. So overall it is an
excellent choice of 4K monitor for coding and another purpose.
Better yet, it also gets our vote as among the best dell monitor for SolidWorks, especially from a value perspective.
We know BenQ monitors are known for its graphics and high performance. So this all-rounder monitor is
a great option for Solidworks program. This UHD 32-inch monitor delivers 4K resolution video
performance and comes with IPS panel. So you will enjoy the cinematic view.
This monitor has a 60Hz refresh rate and 4ms response time. With 100% sRGB, Rec.709, and 10-bit color
it gives impressive and perfect color performance. It is great for photography, editing, and designing.
Darkroom mode will help you to work properly in a dark environment. With animation mode, you can
easily and perfectly control the movement. The KVM switch allows users to control the content of 2 PCs
at the same time. So this monitor is very useful for CAD/CAM. You can perform CAD/CAM more
efficiently. Moreover, 2×5 W built-in speakers offer you fantastic sound quality.
With DualView you can view two modes side-by-side. HotKey Puck allows you to switch between
different modes and control contrast and brightness by a simple click. Low blue light and eye care
technology reduces eye strain and gives comfort. So you can work on the monitor for a long time period.
You can easily adjust the height, pivot, swivel, tilt, and stroke of the monitor. It is also VESA mountable. It
comes with 2x HDMI 2.0, 1x DisplayPort 1.2, Mini DisplayPort, SD card slot, 2x USB 3.0 for connectivity.
So overall it is a perfect choice for Solidworks.
4. LG 27UK850-W 4K Monitor – Best Curved Monitor For SolidWorks
27UK850-W by LG is a great monitor for multi-purpose. It offers lots of features and perfect for
Solidworks program. It has a minimal design and curved stand. It delivers 4K (3840×2160) resolutions.
The screen has IPS technology and 3 side ultra-thin bezels. So you can watch high-quality videos on
It has a refresh rate of 60Hz, a response rate of 5 ms, and a contrast ratio of 1000:1. It has 99% coverage of
the sRGB spectrum, 73% Adobe RGB which provides multiple and accurate colors. So you can create a
clean, sharp, and crisp image perfectly. So it will be a great option for photography, editing, or color
calibration. It has AMD FreeSync and HDR 10 high dynamic range, supports specific level colors and
brightness. AMD FreeSync will help gamer providing boost movement and stunning visual performance.
It comes with a Black stabilizer to reveal superior detail in dark-senses while dynamic action. So it offers
a fluid, butter-smoothly experience. So undoubtedly it is a great choice for CAD and as well as gaming.
It has fantastic on-screen control so you easily and quickly find out necessary monitor settings like
volume, brightness, picture mode presets, dual controller, screen split 2.0, and many others. Its
adjustable ArcLine stand allows height, tilt and pivot adjustment. The monitor is also VESA mountable. It
has 2x USB 3.0 ports, 1x USB Type-C port, 2x HDMI 2.0, 1x DisplayPort 1.2 for connection. So overall it is
a brilliant choice for coding, gaming, and multipurpose.
It’s a great combination of affordability and power, and that’s exactly why it’s one of the best curved monitor for solidworks.
It is excellent monitor with premium features. It is perfect for dual or multi-monitor setup. This 43-inch
wide monitor has 16:9 aspect ratio and delivers 4K UHD (3440×2160) resolution. This monitor also has
LED backlit and IPS technology for wide-viewing angle. Anti-glare coating minimize reflection problem.
So together all these feature will give you cinematic visual quality.
The refresh rate is 60HZ and the response time is 5ms. Maximum brightness is 300-nits. The contrast
ratio is 50,000:1 and covers 100% sRGB color spectrum. Its 1 million colors with 10-bit depth give
real-life accuracy. So it is perfect for photography and editing. Using 3D graphics application or financial
wizard you can easily deal with CAD-CAM. You can easily run Soildworks programs. Philips Multiview
technology allows Picture-by-Picture (4 inputs) or Picture-in-Picture (2 inputs) for maximum
productivity. Moreover built-in 7W (x2) Stereo speakers offer fantastic sound quality.
It is VESA mountable but unfortunately it has only tilt adjustment and no VESA mounting facility. For
connectivity option it has 2x HDMI 2.0, 2x DisplayPort 1.2, VGA, 4x USB 3.0 ports. Lastly it has slim and
stunning design. So undoubtedly it is great for value for price. So overall this is an excellent choice for best monitor for solidworks.
It is very productive monitor and useful for CAD. This 28-inch monitor delivers 4K resolutions
(3440×2160). It doesn’t have any IPS panel but has a TN panel. It provides stunning image with 8 million
pixels and lifelike view.
Response time is 1ms and refresh rate is 60Hz. It gives fluid performance without buffering. This monitor
comes with FreeSync technology. FreeSync technology minimizes tearing and gives you butter-smoothly
gaming experience. It gives fast on-screen movement and reduce motion blur and ghosting. 1 billion
color supports it provides rich color performance. You can create sharp, clean, crisp image with accurate
color accuracy. So is perfect for CAD, designing, photography, editing, color calibration and gaming. It
also has two awesome features Picture-in-Picture and Picture-by-Picture. So you can easily done
multi-tasking on your window or connect two PCs. Easy on-screen control allows to adjust color,
brightness and sharpness easily.
Its eye care mode has flicker-free and blue light technology. It will reduce eye strain and gives you
comfort. So can perform work on monitor for long period. The monitor is VESA mountable but has no
ergonomic design. For connectivity it has HDMI 2.0 port and DisplayPort. Lastly, it has slim design,
stunning look and sharper viewing angle with T-shaped stand. So overall this is best monitor for solidworks.
7. ASUS PB287Q – Best Monitor For SolidWorks
It is an all-rounder and affordable monitor for you. Its 28-inch display gives 4K UHD (3440×2160)
resolution. It has TN panel, so you can work near sunlight. This monitor has both vertical and horizontal
mode. So you will enjoy premium visual experience.
The refresh rate is 60Hz and quick 1ms response time. So you will get smooth and boost speed during
work. It has smart 1B:1 contrast ratio and 330cd/m2 brightness. With pixel density of 157 PIP, it provides
more than 8 million pixels. 100% sRGB, Rec709 and 10-bit color depth gives smooth color performance.
It has multiple color strength including a subtle color production. CAD/CAM and animation mode is very
helpful for designing and CAD. With OSD you can easily adjust the brightness level. Built-in
Picture-in-Picture (PIP) and Picture-by-Picture (PBP) allows simultaneously view and switch between
content from two sources.
ASUS eye care technology offers flicker-free technology and low blue light mode. So it gives protection
to your eye during work and you able to work on monitor for long time period. Ergonomic design allows
tilt, pivot, swivel and height adjustment easily. It is also VESA wall mounting. Monitor has versatile
connectivity with HDMI, HDMI/MHL and DisplayPort. It comes with 3 years warranty. So undoubtedly it
is excellent choice for Solidworks as well as other activities.
BenQ SW271 has excellent graphics and visual effects. This 27” monitor delivers fantastic 4K UHD
resolution. The screen also comes with IPS panel and LED backlit. The High Dynamic Range (HDR)
provides premium quality image and video performance.
The response time is 5ms. It covers 99% sRGB spectrum and DCI-P3 color spaces. With AQCOLOR
technology you will enjoy brilliant image quality. 14-bit 3D LUT provides accurate color performance.
With Hardware calibration technology you can adjust the image processing without changing the
graphics setting. It has also black and white film effect. It provides latest Palette Master Element
Calibration Software, which supports the color presentation. The Darkroom mode is excellent for work
in dim light.
This monitor provides dual gamut along with Picture-in-Picture (PIP) and Picture-by-Picture (PBP). It
allows simultaneously view and switch between content from two sources. Shading hood reduces
screen glare from ambient lighting. Its eye care mode reduces eye strain and ensures long-time work on
monitor. It has versatile connectivity with HDMI, DisplayPort, USB 3.0 and USB Type-C. The ergonomic
design provides height, tilt, swivel and height adjustment. It is also VESA mountable. So overall this
monitor is excellent option for Solidworks program and other functions.
This is an amazing monitor which provides versatile performance. This 28-inch monitor has 16:9 aspect
ratio and delivers 4k UHD resolution. It has no IPS panel but comes with 8bit-FRC TN panel. So you will
enjoy high ultra-clear visual experience.
The refresh rate is 60Hz and response time is 1ms. It comes with SmartResponse technology, which
automatically adjusts the response times according to requirement. So you can easily play games and perform other activities. It can produce 1.07 million colors with accuracy. It creates sharp, clear and crsip
images and offers fantastic color performance. The 3D graphics applications or financial wizard is great
solution for CAD/CAM. So you can create image, perform CAD, enjoy gaming without lag and ghosting.
Moreover it has Picture-in-Picture (PIP) and Picture-by-picture (PIB) support. The built-in speakers offer
excellent sound quality. So you can simultaneously view and switch between content from two sources.
This monitor has installed touch sensor which is a modern feature. With mobile high definition link you
can connect the monitor with mobile and other devices directly and easily. It has versatile connectivity
with VGA, DVI-Dual Link, DisplayPort 1.2, MHL-HDMI, USB 2.0 (2x) and USB 3.0(2x, 1 fast charge). Lastly,
it has ergonomic design for tilt, swivel, pivot and height adjustment. It is also VESA mountable. So overall
this monitor is great choice for you.
10. BenQ PD2700Q – Best Monitor For AutoCAD And SolidWorks
This 27-inch monitor offers high performance to users. It has 2560×1440 resolutions and comes with
a high-quality IPS panel. This monitor provides Solidworks or a designer more screen real estimate
compared to what an FHD monitor gives. So you will get brilliant visual quality.
This monitor has an aspect ratio of 16:9, 1000:1 native contrast ratio, maximum brightness is 350cd/m2,
refresh rate is 60HZ, and response time is 4ms. It covers 100% sRGB color gamut and cover REC 709 color
space. So overall it offers a brilliant color experience and boosts performance. This monitor has CAD/CAM
and animation mode, which is very useful for designing, editing, or SolidWorks. The darkroom mode will
allow you to perform in a dim or dark environment. It has a dual-mode view which allows you to view dual
mode on the same screen side by side. The monitor has built-in speakers (2×1 W) for excellent sound
The Eye Care Technology has a low blue light and flicker-free technology. So it will reduce stress from your
eye and you will able to perform on the monitor for a long time period. The connectivity ports are HDMI, DisplayPort v1.2, and USB hub. The ergonomic design allows tilt, swivel, height, and pivot adjustment
options. It is also VESA mountable. So it is a good option if you looking for a monitor for Solidworks.
However, there’s still no doubt that the BenQ PD2700Q deserves its lofty spot on the best monitor for AutoCAD and SolidWorks list.
11. ViewSonic VP2771
It is a very powerful laptop with lots of fantastic features. This 27-inch monitor delivers WHQD (2560×1440) resolutions. The aspect ratio is 16:9. The frameless design provides a seamless viewing experience and it also has wide viewing angles and a built-in IPS panels. So you will enjoy premium and lifelike visual video quality.
This monitor is calibrated to deliver amazing Delta E<2 value and includes a detailed calibration report
for sRGB, EBU, SMPTE-C, Rec. 709, and DICOM-SIM color spaces. 14-bit 3D table produces 4.39 million
colors accurate for image reproduction. Integrated uniform color uniformity gives top quality color
performance. So you will get a sharp, clean, clear image. It also has a 6-axis color enhancement. KVM switch
allows users to control the content of 2 PCs at the same time.
The built-in light ambient light sensor helps to adjust screen brightness according to the surroundings.
The connectivity ports are DisplayPort, Mini DisplayPort, HDMI inputs, USB port, and powerful USB 3.1
type C input. The adjustable stand allows tilt, height, swivel, and pivot adjustment. It is also VESA
mountable. So undoubtedly it is great for SolidWorks, designing, editing, photography and other purposes.
12. Apple IMAC Pro – Best 27 Inch Monitor For SolidWorks
This is a very powerful professional monitor (most powerful Mac ever) but it is very expensive. So if you
are on a budget then avoid it. This 27-inch monitor delivers extremely high 5K (5120×2880) resolutions. It
has an extremely thin chassis and thick design (stunning 5mm). You can work on 4K resolution and still have
a lot of extra space for their editing tools, browser, or another window.
The P3 gamut space, sRGB color space offers top color accuracy and with one billion color supports. The
peak brightness is 500-nits. So it will deliver brilliant color and visual performance. This monitor offers
8GB Radeon Pro Vega 56 graphics which is excellent for 3D animations, editing, photography, designing
or Solidworks, software developers, etc. It also has 32GB RAM and a 3.2 GHz 8 Core Intel Xeon Processor
which is perfect for multiple functions. It comes with 1TB of SSD storage. It has effective cooling system
features that circulate cool air and eliminates hot air. It also has a magnetic keyboard, mouse, and
trackpad for working comfort. Four mics and Stereo speakers provide great sound facility.
The connectivity ports are 4x Thunderbolt 3(USB-C) ports, 4x USB 3 ports, and one 10GB Ethernet port.
Lastly, it is lightweight and has stunning look. So if you have money to spend then undoubtedly this all in
one monitor is a great choice for the best 27 inch monitor for SolidWorks.
Key Features Of Best Monitor For Solidworks:
Screen size: A 27-inch monitor is perfect for Solidworks. If you are on a budget then 24-inch is
good. But if you have money to spend then go for the big screen.
Resolution: Higher resolution means higher performance. The ideal resolution for Solidworks is
4K. But if you have a low budget then go for QHD (2560×1440) resolution.
Color performance: An ideal professional monitor covers 100% sRGB color space. There are
monitors with 8-bit panels producing 16.7 million colors and 10-bit panels producing 1.07 billion
colors. There are monitors with 14 bit 3D LUT panels but they are very expensive.
Aspect ratio: Normally monitors come up with an aspect ratio of 16:9. The most popular aspect
ratio which is known for gaining momentum quickly is Ultrawide (21:9). For professional it
better to go with 16:9
Panel type: IPS panel is perfect for you. But if you are in budget then go for TN or VA panels.
In this buying guide, we mention the 12 best monitor for SolidWorks for 2022 and also discuss their features. We also discuss some key features of Solidworks monitors. All the monitors mentioned in this article are
excellent for SolidWorks. These all monitors are of various price ranges. You can easily choose according
to your screen size, resolution, aspect ratio, color pixels, response time, and other features. Hope this
buying guide will help you. Thank you!
Also Read: Best Vertical Monitor for Coding